Serial Series

 

Multifunction Analog, Digitial I/O, and Temperature Modules

Serial Series
zoom

 

KEY HIGHLIGHTS

Serial interface data acquisition (DAQ) devices with up to eight temperature/ voltage inputs, up to four voltage/current outputs, two 32-bit counters, up to 16 digital input, open collector outputs, and up to 7 relays.

模拟输入
通道数 分辨率 最大采样率 采样
多达8路 高达16-位 不同产品不同 不同产品不同
范围 隔离
不同产品不同
传感器
热电偶 RTD 热敏电阻 电压
Yes Yes Yes
模拟输出
通道数 分辨率 速度
多达4路 12-位 或 14-位 不同产品不同
数字I/O
通道数 计数器/定时器 编码器
多达16路 多达 2/—
软件 电源
操作系统支持 驱动 电源
Windows® Universal Library™ SW Suite 外部


Part Number Description Qty
CB-7011 Single-channel thermocouple input module
CB-7011D Single-channel thermocouple input module with LED display
CB-7012 Single-channel voltage or 4-20 mA input module with 16-bit conversion resolution, one digital input, and two digital outputs
CB-7012D Single-channel voltage or 4-20 mA input module with LED display
CB-7013 Single-channel RTD input module
CB-7013D Single-channel RTD input module with LED display
CB-7017 8-channel voltage or ±20 mA input module
CB-7017F 8 channel voltage input module, with fast sampling 75 S/sec
CB-7018 8-channel voltage and thermocouple input module
CB-7018P 8-channel voltage and thermocouple input module with extended thermocouple type inputs
CB-7021 Single-channel analog voltage or current output module
CB-7024 4-channel analog voltage or current output module
CB-7033 3-channel RTD input module
CB-7041 14-channel isolated digital input module
CB-7042 13-channel isolated open collector output module
CB-7043 16-channel non-isolated open collector output module
CB-7044 Isolated digital I/O module with 4 digital inputs and 8 digital outputs
CB-7050 15-channel digital I/O module with 8 channels of open collector digital outputs and 7 digital inputs
CB-7052 8-channel isolated digital input module
CB-7053 16-channel contact monitoring digital input module
CB-7060 4-relay output module (2 Form A NO, 2 Form C) with four digital inputs
CB-7063 3-relay output module with eight digital inputs
CB-7063A 3-relay (solid-state) output module with eight digital inputs
CB-7063B 3-relay solid-state output module with eight digital inputs
CB-7067 7-relay output module (Form A NO)
CB-7080 2-channel, 32-bit counter/frequency input module
CB-7080D 2-channel, 32-bit counter/frequency input module with LED display
CB-7510 Isolated RS-485 high-speed repeater for use with CB-COM series
CB-7520 Isolated RS-232 to RS-485 converter for use with CB-COM series
Accessories & Cables
C9FF-10 Cable, serial, 9-pin female to 9-pin female, 10 ft.
C9FM-10 Cable, serial, 9-pin male to 9-pin female, 10 ft.
C9FM-25 Cable, serial, 9-pin male to 9-pin female, 25 ft.
C9FM-50 Cable, serial, 9-pin male to 9-pin female, 50 ft.
CB-PWR-24/110V Power supply, direct plug-in, 110 VAC, 24 VDC
More Options...
CB-DIN-540A Power supply, 24 VDC/2A, DIN-rail mountable
CB-PWR-24/220V Power supply, direct plug-in, 220 VAC, 24 VDC
CB-PWR-24/230 Power supply, direct plug-in, 230 VAC 24 VDC
Software
DASYLab® LITE DASYLab精简版提供所有驱动程序、不含分析功能、包含有限的模块数和1个布局窗口
More Options...
DASYLab® BASIC DASYLab普通版提供所有驱动程序、所有标准模块(不提供信号分析和操作模块)和1个布局窗口
DASYLab® FULL DASYLab完整版提供所有驱动程序、所有标准模块、200个布局窗口和控制定序器
DASYLab® PRO DASYLab专业版提供所有驱动程序、DASYLab完整版版本,以及所有附加模块(无第三方模块)
DASYLab® RUNTIME DASYLab Runtime允许您在另一台计算机上(硬件配置兼容)运行现有工作表应用程序

Product Reviews


5 / 5
Ease of Use
5 / 5
Value
5 / 5
Techincal Support
5 / 5

100% of new reviewers recommend this product


CB-7052
October 05, 2015
Customer Service

I am not the end user so I cannot rate this product however, I did like the ease of ordering and I appreciate the automatic follow ups I received. The process was seamless and easy.

  • Job Title: Customer Service Representative
  • Industry: Electrical industrial distribution
  • Application:
  • From: Austin, Texas
  • Company Size: 5000*
  • Software Used: C++/C#/VB

  • Ease of use
  • Value
  • Techincal Support
Yes, I recommend this product!

Was this review helpful? Yes (0) / No (1)

CB-7520
August 01, 2013
Reliable

Used the CB-7520 with several digital I/O modules (CB-7067, CB-7041, CB-7060) in a RS485 network in a system and our experience has been excellent. We used the system daily for about 2 years during development and then deployed the system that is only used once per year for a 5 day run. Deployed about 9 years ago and the Measurement Computing (Computer Boards) modules wake up each year and do their job like the first day we hooked them up. Nice Job!

  • Job Title: Engineer
  • Application: Vacuum chamber, aluminum vapor deposition system
  • From: OH
  • Company Size: 1-100
  • Software Used: Other

  • Ease of use
  • Value
  • Techincal Support
Yes, I recommend this product!

Was this review helpful? Yes (0) / No (0)




I wish to monitor the serial port of a PC for a signal indicating an object in front of a photo eye.

  • Job Title: Client Solutions Manager
  • Industry: data collection
  • Application: Line side automatic label printing
49 months ago
MBarkerusa Centerville Ohio


Answers

The CB-7012 supports a single channel of analog input. Supported input rages are as follows: +-10, +-5, +-1, +-.5, +-.125 and +-20 mA. If your photo eye outputs a signal within any one of the selectable input rages then the CB-7012 would be acceptable. My experience with photo eyes are that they are TTL based which means they output a 0 to 5 volt signal. If that is the case then a counter product may do the trick. You also supplied additional information regarding the need to monitor a serial port on a PC. A handful of Measurement Computing products communicate via the PC serial bus but are not capable of monitoring a PC serial port directly. Additional information on your photo eye would be very helpful in selecting the correct DAQ product. Please contact our Sales Engineering department at 1-800-234-4232 ext-3 for additional assistance in selecting the correct product for your project.

49 months ago
MeasurementComputing

Was this answer helpful? Yes (0) / No (0)

  • Job Title: Owner
  • Industry: Engineering systems design
  • Application: Industrial controls
29 months ago
EhrenAchee Austin, TX


Answers

The Operating Temperature:-25 to 75°C and the Humidity is: 5 to 95% (non-condensing)

29 months ago
Measurement Computing

Was this answer helpful? Yes (1) / No (0)

I need manual CB-7017F. Please help me

  • Job Title: engineer
  • Industry:
  • Application: measure V,I of Battery
40 months ago
huynhdang Vietnam


Answers

Hello - the manual for the CB-7017F may be found at: http://www.mccdaq.com/PDFs/manuals/cb_com7012_17.pdf

40 months ago
MeasurementComputing

Was this answer helpful? Yes (0) / No (0)

Also have CB-7520; same question.

  • Job Title: Engineer
  • Industry: Aircraft
  • Application: Engine test stand temperature measurement
24 months ago
Stevep Olympia, WA


Answers

Hello SteveP, The maximum operating temperature for both the CB-7018 and the CB-7520 is +75 C.

24 months ago
Measurement Computing

Was this answer helpful? Yes (0) / No (0)

Senhores, Estou precisando compra esse módulo. Onde e como devo fazer? Tem revenda ou loja no Brasil? Aguardo resposta. Atenciosamente, Genilton Nascimento

  • Job Title:
  • Industry:
  • Application:
47 months ago
Genilton Brasil


Answers

Nosso Brasil Distribuidor é: LRI Automação Rua Sergio Jungblut Dieterich, 900 - Pav. 26 Porto Alegre - RS. - Cep: 91060-410 Phone: 0800 7044 788 Fax: +55-51-2129-3017 vendas@lri.com.br http://www.lri.com.br

47 months ago
MeasurementComputing

Was this answer helpful? Yes (0) / No (0)

I'm useing labview and llike to controle this kind of modules with it

  • Job Title: Project Engineer
  • Industry: See website
  • Application: Controleing our seismic air container
51 months ago
Mike Utrecht, The Netherlands


Answers

Our current software support for the CB-7024 does not include LabVIEW. Our recommendation would be to use our USB-3102 analog output device. The USB-3102 supports 4; 16 bit analog voltage or current output channels and comes with our LabVIEW drivers. You can review detailed information on our USB-3102 here: http://www.mccdaq.com/usb-data-acquisition/USB-3102.aspx

51 months ago
MeasurementComputing

Was this answer helpful? Yes (0) / No (0)

I am looking at the cbcom_digital.pdf for this product. The manual is Titled CB-7000 DIO Manual. On page 24, it says to refer to "CBCOM Network Setup and Quick Start Manual" and "Getting Started". Where can I find these documents?

  • Job Title: Researcher
  • Industry: Higher Education and Research
  • Application: Specialized remote measurement instrument for atmospheric research.
15 months ago
Steve Los Angeles


Answers

Hi Steve, thank you for pointing this out to us. The information you're looking for can be found at the below link. http://www.mccdaq.com/pdfs/manuals/cb-7000_utilities.pdf

15 months ago
Measurement Computing

Was this answer helpful? Yes (0) / No (0)

Can you provide information on the frequency count method and what kind of accuracy can I expect. For example a 40kHz input signal with a ~5ms sampling. Also on the input range - sine wave, square wave, bi- or uni-polar, voltage range, ... Thanks

  • Job Title: researcher
  • Industry: environmental studies
  • Application: water level tests
30 months ago
Leroy Outer Banks


Answers

The CB-7080D uses a count method where it will count the number of pulses in known Time. The accuracy is based on the selectable gate timer. The CB-7080D supports two gate timing selections, 1.0 sec or 0.1 sec which resolves to a 1 Hz or 10 Hz frequency accuracy. The CB-7080D supports two logic level digital input ranges. Depending on if you select isolated or non-isolated inputs, will determine what range you can use. The ranges are as follows: Logic Level 0: Isolated: +1 volt max Non-Isolated: 0.8 volts max (TTL) Logic Level 1: Isolated: +3.5 to 30 volts Non-Isolated: 2.4 volts min (TTL)

30 months ago
Measurement Computing

Was this answer helpful? Yes (0) / No (0)

We have developed. Net application, which uses libraries containing CBCOM cd, also the computer's operating system is Windows 7, we want to know if this module supports. Net and OS 7 Regards

  • Job Title: Director
  • Industry: TI
  • Application: Manufacture
39 months ago
VENTICA Vene, 51008 Tartu, Estonia


Answers

Hello Ventica, No software driver or file from MCC is needed to use the CB-7520 with or without any of the other CB-COM series modules. We do ship a DLL and configuration app that pre-dates Win7. While it is convenient to use to get familiar with the CB-COM modules, it was not tested on Win7, and it is not necessary to install this to use the modules.

39 months ago
MeasurementComputing

Was this answer helpful? Yes (0) / No (0)

Included Software


Optional Software


  • DASYLab®2016 Software lets you interactively develop PC-based data acquisition applications by simply attaching functional icons

Product Manuals


CB-7011
document
 
CB-7011D
document
 
CB-7012
document
 
CB-7012D
document
 
CB-7013
document
 
CB-7013D
document
 
CB-7017
document
 
CB-7017F
document
 
CB-7018
document
 
CB-7018P
document
 
CB-7021
document
 
CB-7024
document
 
CB-7033
document
 
CB-7041
document
 
CB-7042
document
 
CB-7043
document
 
CB-7044
document
 
CB-7050
document
 
CB-7052
document
 
CB-7053
document
 
CB-7060
document
 
CB-7063
document
 
CB-7063A
document
 
CB-7063B
document
 
CB-7067
document
 
CB-7080
document
 
CB-7080D
document
 

 

Quick Start Guide


DASYLab® LITE
QS-DASYLab-MCCDRV.pdf
 

 

Product Videos


MCC Video Library
video
 

 

Programming Example Downloads      download

1 Year Warranty

1年保修

所有产品均有一年保修,请放心购买。

30 Day Money Back Guarantee

质量
保证

我们致力于设计和制造高于用户期望的数据采集(DAQ)产品。

Live Help

在线帮助

不知道哪款产品最适合您的应用?我们的销售工程师会帮助您。