TC-32

基于USB或以太网的高精度热电偶测量方案

TC-32
zoom

 

KEY HIGHLIGHTS

TC-32数据采集系统提供高精度热电偶测量,采用USB或以太网接口。各通道均有温度补偿(CJC)、热电偶开路检测和数字I/O,并可通过TC-32-EXP将热电偶输入扩展到64通道,数字输入通道扩展至16路,数字输出通道扩展至64路。

模拟输入
通道数 分辨率 最大采样率 采样
32路差分可扩展至64差分 24-位 3 S/s/ch 复采样
范围 隔离
±78.125 mV 500 V ch-host
传感器
热电偶 RTD 热敏电阻 电压
Yes
模拟输出
通道数 分辨率 速度
数字I/O
通道数 计数器/定时器 编码器
40可扩展至80
软件 电源
操作系统支持 驱动 电源
Windows®, Android™, and Linux® Universal Library™ SE Suite 外部


Part Number Description Qty
TC-32 基于USB或以太网的32通道热电偶测量设备,24位分辨率,具有8路数字输入和32路数字输出/温度报警功能。附带USB线缆、以太网线缆、电源适配器和MCC DAQ软件光盘
Signal Conditioning Options
TC-32-EXP 适用于TC-32的24位分辨率热电偶输入通道扩展设备,带8路数字输入和32路数字输出/温度报警。附带40-pin扩展线缆,用于连接TC-32。
Accessories & Cables
745690-J001 J-type thermocouple wire, fiberglass (0 °C to 482 °C, 32 °F to 900 °F) 1 m
More Options...
745690-J002 J-type thermocouple wire, fiberglass (0 °C to 482 °C, 32 °F to 900 °F) 2 m
745690-K001 K-type thermocouple wire, fiberglass (0 °C to 482 °C, 32 °F to 900 °F) 1 m
745690-K002 K-type thermocouple wire, fiberglass (0 °C to 482 °C, 32 °F to 900 °F) 2 m
745690-T001 T-type thermocouple wire, fiberglass (0 °C to 260 °C, 32 °F to 500 °F) 1 m
745690-T002 T-type thermocouple wire, fiberglass (0 °C to 260 °C, 32 °F to 500 °F) 2 m
C40FF-1 Cable, 40-conductor ribbon, female to female, 1 ft.
More Options...
C40FF-10 Cable, 40-conductor ribbon, female to female, 10 ft.
C40FF-15 Cable, 40-conductor ribbon, female to female, 15 ft.
C40FF-2 Cable, 40-conductor ribbon, female to female, 2 ft.
C40FF-20 Cable, 40-conductor ribbon, female to female, 20 ft.
C40FF-25 Cable, 40-conductor ribbon, female to female, 25 ft.
C40FF-3 Cable, 40-conductor ribbon, female to female, 3 ft.
C40FF-4 Cable, 40-conductor ribbon, female to female, 4 ft.
C40FF-5 Cable, 40-conductor ribbon, female to female, 5 ft.
C40FF-50 Cable, 40-conductor ribbon, female to female, 50 ft.
C50FF-1 Cable, 50-conductor ribbon, female to female, 1 ft.
More Options...
C50FF-10 Cable, 50-conductor ribbon, female to female, 10 ft.
C50FF-15 Cable, 50-conductor ribbon, female to female, 15 ft.
C50FF-2 Cable, 50-conductor ribbon, female to female, 2 ft.
C50FF-20 Cable, 50-conductor ribbon, female to female, 20 ft.
C50FF-25 Cable, 50-conductor ribbon, female to female, 25 ft.
C50FF-3 Cable, 50-conductor ribbon, female to female, 3 ft.
C50FF-4 Cable, 50-conductor ribbon, female to female, 4 ft.
C50FF-5 Cable, 50-conductor ribbon, female to female, 5 ft.
C50FF-50 Cable, 50-conductor ribbon, female to female, 50 ft.
CIO-MINI50 Universal screw-terminal board, 50-pin (view dimensional drawing)
CN-144-JM Type J male connector
More Options...
CN-144-KM Type K male connector
CN-144-TM Type T male connector
PS-5V2AEPS Replacement power supply, 12-watt, for TC-32, USB-1602HS Series, USB-1604HS Series, USB-1608HS Series, USB-2416 Series, USB-3110, USB-3112, USB-3114, WEB-TEMP, WEB-TC - plugs available separately
More Options...
Australia Plug Australian interchangeable plug for power supplies
Europe Plug European interchangeable plug for power supplies
UK Plug UK interchangeable plug for power supplies
US Plug US interchangeable plug for power supplies
SCB-50 Signal connection box, two independent (side-by-side) sets of 50 screw terminals, each connected one-to-one to a 50-pin header for ribbon cable mating
Software
DAQami™ v4.2.1 数据采集与信号生成的应用软件
DASYLab® LITE DASYLab精简版提供所有驱动程序、不含分析功能、包含有限的模块数和1个布局窗口
More Options...
DASYLab® BASIC DASYLab普通版提供所有驱动程序、所有标准模块(不提供信号分析和操作模块)和1个布局窗口
DASYLab® FULL DASYLab完整版提供所有驱动程序、所有标准模块、200个布局窗口和控制定序器
DASYLab® PRO DASYLab专业版提供所有驱动程序、DASYLab完整版版本,以及所有附加模块(无第三方模块)
DASYLab® RUNTIME DASYLab Runtime允许您在另一台计算机上(硬件配置兼容)运行现有工作表应用程序
TracerDAQ® Pro 开箱即用的虚拟仪器套件,集成带状图、示波器、函数发生器和速率发生器 – 专业版

Product Reviews




With reference to the previous question. Actually I need to continuously monitor temperature in a graph and see if it attains the steady state. If I cannot use the sample clock then how can continuously monitor the temperature values

  • Job Title: Student
  • Industry:
  • Application:
4 months ago
Huss123 Texas


Answers

As detailed in our previous answer the TC-32’s architecture only supports reading the data via software polling. However each enabled thermocouple input is sampled continuously and converted at the maximum A/D converter rate of 3 Hz per channel (max). The best approach for continuously reading your data within LabVIEW would to put our ULx Read.VI in a “Timed Loop” structure.

4 months ago
Measurement Computing

Was this answer helpful? Yes (0) / No (0)

As soon as I change the configuration of ULx Create from AI Temperature to AI voltage mode it gives an error 10133 "Specified operation is not supported for this device." Furthermore I cannot add the sampling clock, it gives an 10015 "Paced operation is not supported for the specified task, Use No Clock mode." So for the TC-32 model, does the Ulx library support AI voltage mode and does it support sampling the data ?

  • Job Title: Student
  • Industry:
  • Application:
5 months ago
Huss1234 Texas


Answers

The TC-32 architecture supports only software-paced readings (hence the error when you try to specify a clock rate). While the TC-32 architecture has a “voltage” mode (which is of the range +/- 78 mV), it is not supported in ULx. If you wish you measure millivolts in LabVIEW with the TC-32, then please contact our Technical Support folks, who can provide you an example of a workaround (how to call our underlying UL from within LabVIEW).

5 months ago
Measurement Computing

Was this answer helpful? Yes (0) / No (0)

When I try to install the ULx library for labview. A dialogue box appears displaying that Labview version 2010 or higher is required. Even though I have labview 2016 version installed in my PC.

  • Job Title: Student
  • Industry:
  • Application:
5 months ago
Huss1234 TX


Answers

The physical CD you are installing from appears to pre-date the release of our LabVIEW 2016 compatible ULx driver. Instead, download the latest MCCDAQ software suite from our website, and it will install properly on LabVIEW 2016.

5 months ago
Measurement Computing

Was this answer helpful? Yes (0) / No (0)

Hi we use Dasylab to communicate with a Daqlab 2001 unit via ethernet. Is it possible to use Dasylab to communicate with the TC-32 in addition to the Daqlap from the same PC/Dasylab program? i.e. can we control multiple units from Dasylab at the same time? best regards george

  • Job Title: professor
  • Industry: education/research
  • Application: research
13 months ago
georgeH Loughborough UK


Answers

Yes, DASYLab can communicate with multiple DAQ devices at the same time. You will have no conflicts using an IOtech DaqLab/2001 and a TC32 in the same DASYLab program. Both drivers are compatible with each other.

13 months ago

Was this answer helpful? Yes (0) / No (0)

Can scripting languages such as Python be used to communicate/record from the TC-32?

  • Job Title: Test Engineer
  • Industry:
  • Application:
14 months ago
jb


Answers

Hello JB - MCC does not currently have formal python support or examples. Some customers have called our Universal Library’s DLL from Python, and several have posted their efforts on the internet

14 months ago
Measurement Computing

Was this answer helpful? Yes (0) / No (0)

It is possible to use TC-32 with matlab (like USB-TC)?

  • Job Title: Lecturer
  • Industry:
  • Application:
16 months ago
Thanh


Answers

The current MATLAB driver set does not have support for the TC-32. However, Mathworks is actively developing 64-bit drivers to support MCC products in MALAB version R2016. For more information, or to request support for a specific device please contact the Mathworks at www.mathworks.com/support/contact_us

16 months ago
Measurement Computing

Was this answer helpful? Yes (0) / No (0)

  • Job Title: Engineer
  • Industry:
  • Application:
20 months ago
SPETE Dubuque IA


Answers

Yes, multiple TC-32/TC-32-EXP configurations can be used to obtain additional temperature inputs. The TC-32/TC-32-EXP is compatible with 10Base-T or 100Base-TX Ethernet ports, hubs, or switches.

20 months ago
Measurement Computing

Was this answer helpful? Yes (0) / No (0)

Included Software


  • TracerDAQ® for acquiring and displaying data and generating signals
  • InstaCalTM software utility for installing, configuration, and testing
  • Universal Library includes support for Visual Studio® and Visual Studio®.NET, including examples for Visual C++®, Visual C#®, and Visual Basic®.NET
  • ULx for NI LabVIEWTM Library of VIs and example programs to speed your NI LabVIEW development
  • Universal Library for Android® includes support and examples for the Android 3.1 platform (API level 12) and later

Optional Software


  • DAQamiTM - data acquisition companion software for acquiring data and generating signals
  • DASYLab®2016 Software lets you interactively develop PC-based data acquisition applications by simply attaching functional icons
  • TracerDAQ®Pro - Out-of-the-box virtual instrument suite with strip chart, oscilloscope, function generator, and rate generator – professional version

Product Manuals


TC-32
document
 

 

Quick Start Guide


DAQami™ v4.2.1
QS-MCCDAQ.pdf
 
DASYLab® LITE
QS-DASYLab-MCCDRV.pdf
 
ULx for NI LabVIEW™
QS ULx for NI LabVIEW.pdf
 

 

Product Videos


MCC Video Library
video
 

 

Programming Example Downloads      download

1 Year Warranty

1年保修

所有产品均有一年保修,请放心购买。

30 Day Money Back Guarantee

质量
保证

我们致力于设计和制造高于用户期望的数据采集(DAQ)产品。

Live Help

在线帮助

不知道哪款产品最适合您的应用?我们的销售工程师会帮助您。