Wireless WLS 系列

 

无线温度测量器件

Wireless WLS 系列
zoom

 

KEY HIGHLIGHTS

**Limited Availability - Not Recommended for New Designs**
The WLS-TEMP and TC Series isolated data acquisition (DAQ) devices includes WLS Series temperature devices and a USB-to-wireless interface device for remote operation. Features include digital and counter functions, and cold junction compensation. Available with support for thermocouple, RTD, thermistor, or semiconductor sensors.

模拟输入
通道数 分辨率 最大采样率 采样
8 24-位 高达16 S/s 复采样
范围 隔离
不同传感器类型不同 500 V ch-host
传感器
热电偶 RTD 热敏电阻 电压
Yes Yes Yes
模拟输出
通道数 分辨率 速度
数字 I/O
通道数 计数器/定时器 编码器
8
软件 电源
操作系统支持 驱动 电源
Windows® Universal Library™ SW Suite 外部(无线)或总线供电


Part Number Description Qty
WLS-IFC USB-to-wireless interface device
WLS-TC Wireless-based 8-channel thermocouple input device; operates as a wireless and as a USB device
WLS-TC-ValuePack Includes WLS-TC (wireless-based 8-channel thermocouple input device) plus WLS-IFC (USB-to-wireless interface device)
WLS-TEMP Wireless-based high-precision 8-channel temperature measurement device; operates as a wireless and as a USB device
WLS-TEMP-ValuePack Includes WLS-TEMP (wireless-based 8-channel temperature input device) plus WLS-IFC (USB-to-wireless interface device)
Software
DASYLab® LITE DASYLab精简版提供所有驱动程序、不含分析功能、包含有限的模块数和1个布局窗口
More Options...
DASYLab® BASIC DASYLab普通版提供所有驱动程序、所有标准模块(不提供信号分析和操作模块)和1个布局窗口
DASYLab® FULL DASYLab完整版提供所有驱动程序、所有标准模块、200个布局窗口和控制定序器
DASYLab® PRO DASYLab专业版提供所有驱动程序、DASYLab完整版版本,以及所有附加模块(无第三方模块)
DASYLab® RUNTIME DASYLab Runtime允许您在另一台计算机上(硬件配置兼容)运行现有工作表应用程序
TracerDAQ® Pro 开箱即用的虚拟仪器套件,集成带状图、示波器、函数发生器和速率发生器 – 专业版

Product Reviews


3.5 / 5
Ease of Use
3.5 / 5
Value
3.5 / 5
Techincal Support
4 / 5

100% of new reviewers recommend this product


WLS-IFC
February 21, 2014
Lets you move your computer

This lets you move your computer away from your WLS DAQ device. Allows you to get out of the way to collect your data while production still runs.

  • Job Title: Process Engineer
  • Industry: Medical
  • Application: Oven preformance data
  • From: Tualatin, OR, USA
  • Company Size: 101-500
  • Software Used: TracerDAQ

  • Ease of use
  • Value
  • Techincal Support
Yes, I recommend this product!

Was this review helpful? Yes (0) / No (0)

WLS-TC
August 28, 2013
Works fine if there is no WiFi in area

I have used these for several years. Started getting data drops as IT started putting in WiFi (802.11B/G/N). IT installed an access point about 30 feet from the area I was using wireless collection and it stopped working until I had IT reduce the signal strength of the WiFi. I am using the 'old' version. New versions should be more tolerant of the WiFi signals.

  • Job Title: Process Engineer
  • Industry: Medical
  • Application: Process monitoring
Response from MCC
MeasurementComputing, Marketing
August 28, 2013
MCC’s WLS-TEMP and WLS-TC temperature measurement modules use RF communications to send data back to the WLS-IFC. These WLS models contain a XBee radio, and this radio’s 802.15.4 wireless communications shares the same frequency bands as WiFi routers. Earlier WiFi B and G standards did not noticeable interfere with the WLS communications, but MCC has determined that the WiFi N standard can interfere. A FAQ has been posted to our knowledgebase with more info.
  • From: Tualatin, OR, USA
  • Company Size: 101-500
  • Software Used: TracerDAQ

  • Ease of use
  • Value
  • Techincal Support
Yes, I recommend this product!

Was this review helpful? Yes (0) / No (0)




  • Job Title:
  • Industry:
  • Application:
37 months ago
kkkkk


Answers

You will first need to install our drivers/software which can be located on the MCC DAQ CD that shipped with your product. At the very least you will need to install the InstaCal and Universal Library. At this time you can also select to install our TracerDAQ application and our ULx drivers for NI LabVIEW. Once the drivers are installed you may require a reboot of the system. After rebooting you can then proceed to connect up the WLS-IFC module. Once the operating system has installed the hardware, you can proceed with running InstaCal to complete the installation. Please refer to our “Quick Start Guide” at the below link for a detailed step by step installation process. http://www.mccdaq.com/pdfs/manuals/DAQ-Software-Quick-Start.pdf

37 months ago
MeasurementComputing

Was this answer helpful? Yes (0) / No (0)

Included Software


  • TracerDAQ® for acquiring and displaying data and generating signals
  • InstaCalTM software utility for installing, configuration, and testing
  • Universal Library includes support for Visual Studio® and Visual Studio®.NET, including examples for Visual C++®, Visual C#®, and Visual Basic®.NET
  • ULx for NI LabVIEWTM Library of VIs and example programs to speed your NI LabVIEW development

Optional Software


  • DASYLab®2016 Software lets you interactively develop PC-based data acquisition applications by simply attaching functional icons
  • TracerDAQ®Pro - Out-of-the-box virtual instrument suite with strip chart, oscilloscope, function generator, and rate generator – professional version

Datasheets


WLS-IFC
document
 
WLS-TC
document
 
WLS-TC-ValuePack
document
 
WLS-TEMP
document
 
WLS-TEMP-ValuePack
document
 

 

Product Manuals


WLS-IFC
document
 
WLS-TC
document
 
WLS-TEMP
document
 
WLS-TEMP-ValuePack
document
 

 

Quick Start Guide


DASYLab® LITE
QS-DASYLab-MCCDRV.pdf
 
ULx for NI LabVIEW™
QS ULx for NI LabVIEW.pdf
 

 

Product Videos


MCC Video Library
video
 

 

Programming Example Downloads      download

1 Year Warranty

1年保修

所有产品均有一年保修,请放心购买。

30 Day Money Back Guarantee

质量
保证

我们致力于设计和制造高于用户期望的数据采集(DAQ)产品。

Live Help

在线帮助

不知道哪款产品最适合您的应用?我们的销售工程师会帮助您。