| DT9836-12-2-BNC |
Simultaneous USB DAQ Module; 16-bit, 225kHz, 12 AI, 2 AO, 32 DIO, 2 C/T, 3 Q/D, BNC Connectors
|
|
|
| DT9836-12-2-OEM |
Simultaneous USB DAQ Module; 16-bit, 225kHz, 12 AI, 2 AO, 32 DIO, 2 C/T, 3 Q/D, No Enclosure
|
|
|
| DT9836-6-0-BNC |
Simultaneous USB DAQ Module; 16-bit, 225kHz, 6 AI, 32 DIO, 2 C/T, 3 Q/D, BNC Connectors
|
|
|
| DT9836-6-0-OEM |
Simultaneous USB DAQ Module; 16-bit, 225kHz, 6 AI, 32 DIO, 2 C/T, 3 Q/D, No Enclosure
|
|
|
| DT9836-6-4-BNC |
Simultaneous USB DAQ Module; 16-bit, 225kHz, 6 AI, 4 AO, 32 DIO, 2 C/T, 3 Q/D, BNC Connectors
|
|
|
| DT9836-6-4-OEM |
Simultaneous USB DAQ Module; 16-bit, 225kHz, 6 AI, 4 AO, 32 DIO, 2 C/T, 3 Q/D, No Enclosure
|
|
|
| Accessories & Cables |
| BNC DIN RAIL KIT |
Kit for mounting the DT980X Series USB modules to a DIN rail. Horizontal or vertical mounting fits any application. Includes mounting clips, screws, mounting adaptor, and instructions. Rail not included.
|
|
|
| EP355 |
Screw terminal panel. Provides a 14-position screw terminal block for attaching analog input, digital I/O, counter/timer, and clock signals. For OEM configurations only.
|
|
|
| EP360 |
2-meter shielded cable with two 37-pin connectors that connect an EP353 accessory panel to an STP37 screw terminal panel. (Can be used with the -BNC and -OEM versions for analog input connections.)
|
|
|
| EP361 |
+5V power supply and cable. Required for OEM configurations.
|
|
|
| STP37 |
Screw terminal panel. Allows connections to analog input (except with MEASURpoint), digital I/O, counter/timer, and trigger signals from an EP353 or EP356 accessory panel. (Can be used with -BNC and -OEM versions.)
|
|
|
|
|
Software |
| DASYLab® LITE |
DASYLab精简版提供所有驱动程序、不含分析功能、包含有限的模块数和1个布局窗口
More Options...
|
|
|
| DASYLab® BASIC |
DASYLab普通版提供所有驱动程序、所有标准模块（不提供信号分析和操作模块）和1个布局窗口
|
|
|
| DASYLab® FULL |
DASYLab完整版提供所有驱动程序、所有标准模块、200个布局窗口和控制定序器
|
|
|
| DASYLab® PRO |
DASYLab专业版提供所有驱动程序、DASYLab完整版版本，以及所有附加模块（无第三方模块）
|
|
|
| DASYLab® RUNTIME |
DASYLab Runtime允许您在另一台计算机上（硬件配置兼容）运行现有工作表应用程序
|
|
|
