Skip Navigation LinksHome  /  Data Acquisition and Control  /  Multifunction  /  Simultaneous  /  DT9837 Series

DT9837 系列

REVIEWS (3)
 

动态信号分析仪

DT9837 系列
zoom

 

document Product Data Sheets - (PDF printable)
document User's Manual - (PDF printable)
download Software and Driver Downloads

KEY HIGHLIGHTS

DT9837系列USB动态信号分析仪提供便携式高精度测量，可测量声音和振动。各通道均有A/D、1路模拟输出、1路转速表输入和用于直接测量传感器数据的IEPE信号调理电路。

模拟输入
通道数 分辨率 最大采样率 采样
4 24-位 高达105.4 kS/s/ch 同步
隔离 SNR THD SFDR
— 95 dB Typ. -104 dB Typ. 110 dBFS Typ.
模拟输出
通道数 分辨率 速度
多至1路 24-位 高达 96 kS/s
数字I/O
通道数 计数器/定时器 转速表
— — 多至1路
软件 电源
操作系统支持 驱动 电源
Windows® 和 Linux® Open Layers® SW Suite 总线供电

Part Number Description Qty
DT9837 动态信号分析仪, 基于USB, 4路IEPE通道, 24位分辨率, 最大采样率52.7 kS/s/ch, 1路模拟输出, 1路转速表输入。
DT9837-OEM 动态信号分析仪, 基于USB, 4路IEPE通道, 24位分辨率, 最大采样率52.7 kS/s/ch, 1路模拟输出, 1路转速表输入。OEM版本无外壳。
DT9837A 动态信号分析仪, 基于USB, 4路IEPE通道, 24位分辨率, 最大采样率52.7 kS/s/ch, 1路模拟输出, 1路转速表输入，模拟输出回读。
DT9837A-OEM 动态信号分析仪, 基于USB, 4路IEPE通道, 24位分辨率, 最大采样率52.7 kS/s/ch, 1路模拟输出, 1路转速表输入，模拟输出回读。OEM版本无外壳。
DT9837B 动态信号分析仪, 基于USB, 4路IEPE通道, 24位分辨率, 最大采样率105.4 kS/s/ch, 1路转速表输入。
DT9837B-OEM 动态信号分析仪, 基于USB, 4路IEPE通道, 24位分辨率, 最大采样率105.4 kS/s/ch, 1路转速表输入。OEM版本无外壳。
DT9837C-BNC 动态信号分析仪, 基于USB, 4路IEPE通道, 24位分辨率, 最大采样率105.4 kS/s/ch, 1路模拟输出。
Accessories & Cables
BNC DIN RAIL KIT Kit for mounting the DT980X Series USB modules to a DIN rail. Horizontal or vertical mounting fits any application. Includes mounting clips, screws, mounting adaptor, and instructions. Rail not included.
EP386 RJ45 Patch Panel, contains four RJ45 connectors that are wired in parallel, to connect four DT9837, DT9838, and/or DT9847 modules together using the Sync Bus
Software
DASYLab® LITE 基于图标的数据采集、图形、控制和分析软件
More Options...
DASYLab® BASIC 基于图标的数据采集、图形、控制和分析软件
DASYLab® FULL 基于图标的数据采集、图形、控制和分析软件
DASYLab® PRO 基于图标的数据采集、图形、控制和分析软件
DASYLab® RUNTIME 基于图标的数据采集、图形、控制和分析软件
QuickDAQ Advanced FFT Analysis Option QuickDAQ Advanced FFT Analysis Option — License Key
QuickDAQ FFT Analysis Option QuickDAQ FFT Analysis Option — License Key
查看价格请先 录入信息 或 创建账户

Product Reviews


5 / 5
Ease of Use
4.7 / 5
Value
4.7 / 5
Techincal Support
5 / 5

100% of new reviewers recommend this product

DT9837A
November 05, 2018
Superb Support

We have purchase quite a few of the DT9837A over the years -THEY WORK,,, On the few time we have had problems - the technical support has been excellent...and the turn around reasonable.

  • Job Title: vp
  • Industry: measurement
  • Application: monitoring
  • From: SF Bay, Ca
  • Company Size: 1-100
  • Software Used: Other
  • Ease of use
  • Value
  • Techincal Support
Yes, I recommend this product!

Was this review helpful? Yes (4) / No (0)

DT9837
December 05, 2017
Great value

I am not stretching the bounds of this module, but it works great for my acceleration measurements. It was also easy to get a quick view going for a couple of side measurements.

  • Job Title: Test Engineer
  • Industry:
  • Application:
  • From:
  • Company Size: 1-100
  • Software Used: C++/C#/VB
  • Ease of use
  • Value
  • Techincal Support
Yes, I recommend this product!

Was this review helpful? Yes (4) / No (1)

DT9837
December 04, 2017
This product exceeds on every aspect of its performance, reliability and price.

We have been using compact USB DAQ for over 10 years. We have tried almost all manufacturers in this space. We have been purchasing the DT9837 since late 2011 or early 2012. We have purchased over 100 units over that time and have not had one failure or problem with the design. The drivers and API is compact and easy to use. Something that I can strongly attest is unequaled among its competitors. Pricing is competitive and delivery has been reliable and quick, always under 2-3 weeks (once I believe it was a bit over 3 weeks but we were told it would take that long) In most cases usually within one week to 10 days at our door.

  • Job Title: President
  • Industry: Manufacturing Measurement and Analysis software and controls
  • Application: Measurement, Analysis and Control of Machining Vibrations
  • From: Las Vegas, NV
  • Company Size: 1-100
  • Software Used: C++/C#/VB
  • Ease of use
  • Value
  • Techincal Support
Yes, I recommend this product!

Was this review helpful? Yes (2) / No (1)




  • Job Title: PhD student
  • Industry:
  • Application: Experimental measurements
15 months ago
Nitesh Netherlands


Answers

Yes, we offer programming support for DASYLab, MATLAB, LabVIEW, and Microsoft .NET.

15 months ago
Measurement Computing

Was this answer helpful? Yes (0) / No (0)

Can DT9837B works with the buffer signal of -24VDC proximity probes?

  • Job Title: Vibration analyst
  • Industry: Engineering
  • Application: Turbine shaft vibration analysis
20 months ago
nph81 Hanoi, Vietnam


Answers

The DT9837B supports a single Tach input capable of supporting a +- 30 volt signal with a +2 volt trigger level. Your proximity probe must return to a + 2 volt or greater to trigger the tach input.

20 months ago
Measurement Computing

Was this answer helpful? Yes (0) / No (0)

  • Job Title: MD
  • Industry: Research
  • Application: Condition Monitoring
53 months ago
Iain New Zealand


Answers

Yes, the IEPE current/voltage source can be disabled. The default configuration is off or disabled.

53 months ago
Measurement Computing

Was this answer helpful? Yes (2) / No (0)

I have two accelerometers, one is a IMI 628F01 and the other is a WILCOXON 793, my intention is to buy a DT9837 to read vibration RMS and 0-PK in a waveform and export it to Excel spreadsheet.

  • Job Title: Engineer Director
  • Industry: Petrochemical
  • Application: Machine Monitoring
59 months ago
CHCC Porto Alegre/Brazil


Answers

Hello, Both accelerometer models are compatible with the DT9837 Series modules, but require a BNC connector at the end of the cable to make the connection. Depending on your frequency range under test, the base DT9837 and DT9837A modules have a sampling rate up to 52.7kHz, while the DT9837B and DT9837C modules can sample up to 105.4kHz. With regards to software, you would need the ‘QuickDAQ FFT Analysis Option’ for your vibration measurements. QuickDAQ also has an export data to Excel option.

59 months ago
Measurement Computing

Was this answer helpful? Yes (4) / No (1)

Included Software

  • Linux®的UL库 The Universal Library API for Linux is an MCC developed and tested library that supports our most popular devices.
  • DT-Open Layers for .NET a simple to use, yet powerful native .NET class library for developing test and measurement applications in Microsoft Visual Studio®
  • LV-LinkTM a library of VIs (Virtual Instruments) that enable LabVIEW™ programmers to access the data acquisition features of DT-Open Layers-compliant USB and PCI devices
  • DAQ Adaptor for MATLAB® MATLAB® from The MathWorks® is a software environment and programming language used for data acquisition, data analysis, measurement automation, and application development
  • QuickDAQ Base Package Data Logging Software

Optional Software

  • DASYLab®2020 Software lets you interactively develop PC-based data acquisition applications by simply attaching functional icons
  • QuickDAQ Data Logging and FFT Analysis Software

Quick Start Guide

DASYLab® LITE
QS-DASYLab-MCCDRV.pdf
 

 

 

 

Programming Example Downloads      download

Product Videos

MCC Video Library
video
 
1 Year Warranty

1年保修

所有产品均有一年保修，请放心购买。

30 Day Money Back Guarantee

质量
保证

我们致力于设计和制造高于用户期望的数据采集（DAQ）产品。

Live Help

在线帮助

不知道哪款产品最适合您的应用？我们的销售工程师会帮助您。