通道数 分辨率 最大采样率 采样
8 差分 24-位 4 S/s/ch 复采样
范围 隔离
±128 mV 500 V ch-host
热电偶 RTD 热敏电阻 电压
通道数 分辨率 速度
通道数 计数器/定时器 编码器
8 1/—
软件 电源
操作系统支持 驱动 电源
Windows®, Android™, and Linux® Universal Library™ SW Suite 外部

Part Number Description Qty
E-TC 基于以太网的8通道热电偶测量设备,24位分辨率,具有8路可配置的数字I/O通道。附带以太网线缆,电源适配器,和MCC DAQ软件光盘 。功能上与USB-TC一致。
Similar / Related Products
E-1608 基于以太网的数据采集卡,8路模拟输入,250kS/s采样率,2路模拟输出,1路32-bit计数器输入和8路数字I/O口。产品包含了网线,电源适配器和MCC软件光盘。
TC-32 基于USB或以太网的32通道热电偶测量设备,24位分辨率,具有8路数字输入和32路数字输出/温度报警功能。附带USB线缆、以太网线缆、电源适配器和MCC DAQ软件光盘
USB-TC 基于USB的8通道热电偶输入器件
Accessories & Cables
PS-5V1AEPS Replacement power supply, 5-watt, for E-1608, and E-DIO24 - interchangeable plugs available separately
More Options...
Australia Plug Australian interchangeable plug for power supplies
Europe Plug European interchangeable plug for power supplies
UK Plug UK interchangeable plug for power supplies
US Plug US interchangeable plug for power supplies
ACC-205 DIN-rail kit for BTH-1208LS, E-1608, E-DIO24, and USB-200 Series
DAQami™ v4.2.1 数据采集与信号生成的应用软件
DASYLab® LITE DASYLab精简版提供所有驱动程序、不含分析功能、包含有限的模块数和1个布局窗口
More Options...
DASYLab® BASIC DASYLab普通版提供所有驱动程序、所有标准模块(不提供信号分析和操作模块)和1个布局窗口
DASYLab® FULL DASYLab完整版提供所有驱动程序、所有标准模块、200个布局窗口和控制定序器
DASYLab® PRO DASYLab专业版提供所有驱动程序、DASYLab完整版版本,以及所有附加模块(无第三方模块)
DASYLab® RUNTIME DASYLab Runtime允许您在另一台计算机上(硬件配置兼容)运行现有工作表应用程序
TracerDAQ® Pro 开箱即用的虚拟仪器套件,集成带状图、示波器、函数发生器和速率发生器 – 专业版
查看价格请先 录入信息创建账户

Product Reviews

5 / 5
Ease of Use
5 / 5
5 / 5
Techincal Support
4 / 5

100% of new reviewers recommend this product

November 28, 2016
Great Product

Great thermocouple DAQ. It was easy to wire up and start record temperature data. Can be hooked up directly to computer network port without additional router or network switch. Highly recommend it for remote temperature data acquisition.

  • Job Title: engineer
  • Industry: energy
  • Application: testing
  • From: union city, ca
  • Company Size: 1-100
  • Software Used: MATLAB

  • Ease of use
  • Value
  • Techincal Support
Yes, I recommend this product!

Was this review helpful? Yes (3) / No (4)

Is it possible to measure voltage in the range of +-128mV using this device, using NI labview?

  • Job Title: Engineer of automation
  • Industry:
  • Application:
15 months ago
Bjekic Serbia


Voltage measurements using the E-TC and our ULx for NI LabVIEW is not a supported option. A suitable workaround is to use the .NET functions within LabVIEW to create a .NET object that will communicate with Universal Library for Windows. If both thermocouple and voltage measurements are needed then perhaps the USB-2408 is a better choice for a DAQ device. https://www.mccdaq.com/usb-data-acquisition/USB-2408-Series.aspx

15 months ago
Measurement Computing

Was this answer helpful? Yes (0) / No (0)

Can this be integrated directly into a SCADA that uses an OPC/Modbus/DNP3 interface without using the DAQami?

  • Job Title: Automation Engineer
  • Industry: Energy and Power
  • Application:
41 months ago
Jm719 Philippines


The E-TC is not OPC/Modbus/DNP compliant. The use of one of our software applications, e.g. DAQami is required for communication over the Ethernet bus.

41 months ago

Was this answer helpful? Yes (1) / No (0)

we need to measure 20+ channel of thermocouple and 4+ voltage input to measure pressure and/or pulse So can DAQami record the data from multiples E-TC and others modules at the same time ?????

  • Job Title: Special Projects and tests
  • Industry: Ambulances builder
  • Application: climate testing
45 months ago
Jean48 montreal Canada


Multiple E-TC and E-1608 DAQ modules can be combined to increase your channel count. Regrettably, DAQami does not support multiple devices. For an out of the box application that will support multiple DAQ devices you would have to use TracerDAQ PRO. TracerDAQ PRO supports up to 48 inputs from any number of MCC USB or Ethernet devices. Another software option that is easy to use would be DASYLab.

45 months ago
Measurement Computing

Was this answer helpful? Yes (1) / No (0)

Monitoring TCs and counting line cycles for a life test operating up to 10khr but also need to monitor AC voltage. Need small ethernet capable package to do this. E-TC would seem ideal except for no analog input for line voltage measurement. Is there a solution that can do this similar to the E-TC?

  • Job Title: Driector
  • Industry: Lighting
  • Application: Life test monitoring
46 months ago
Ron323 Boston, MA


You are correct in that the E-TC will not support an AC input. You could, however, use the E-TC and our E-1608 for your voltage measurements. Please be aware in that the E-1608 supports a max input range of +-10 VDC or Volts-Peak so your AC signal will need to be conditioned prior to using the E-1608 DAQ device.

46 months ago
Measurement Computing

Was this answer helpful? Yes (0) / No (0)

Included Software

  • TracerDAQ® for acquiring and displaying data and generating signals
  • InstaCalTM software utility for installing, configuration, and testing
  • Universal Library includes support for Visual Studio® and Visual Studio®.NET, including examples for Visual C++®, Visual C#®, and Visual Basic®.NET
  • ULx for NI LabVIEWTM Library of VIs and example programs to speed your NI LabVIEW development
  • Universal Library for Android® includes support and examples for the Android 3.1 platform (API level 12) and later
  • Linux® Support for MCC DAQ products

Optional Software

  • DAQamiTM - data acquisition companion software for acquiring data and generating signals
  • DASYLab®2020 Software lets you interactively develop PC-based data acquisition applications by simply attaching functional icons
  • TracerDAQ®Pro - Out-of-the-box virtual instrument suite with strip chart, oscilloscope, function generator, and rate generator – professional version

Product Manuals



Quick Start Guide

DAQami™ v4.2.1
ULx for NI LabVIEW™
QS ULx for NI LabVIEW.pdf




Programming Example Downloads      download

Product Videos

MCC Video Library
1 Year Warranty



30 Day Money Back Guarantee



Live Help