Skip Navigation LinksHome  /  Data Acquisition and Control  /  Analog Output Devices  /  PCI-DDA Series

PCI-DDA Series

REVIEWS (1)
 

12- or 16-Bit Analog Output Boards

PCI-DDA Series
zoom

 

KEY HIGHLIGHTS

The PCI-DDA Series provide analog output and digital I/O. Available with 12- or 16-bit resolution.

模拟输出
通道数 分辨率 速度
多达8路 12-bit 或 16-bit 高达200 kS/s/ch
数字 I/O
通道数 计数器/定时器 编码器输入
多达 48 — —
软件 电源
操作系统支持 驱动 电源
Windows® and Linux® Universal Library™ SW Suite 总线供电

Part Number Description Qty
PCI-DDA02/12 PCI-based 2-channel, 12-bit analog output board with 48 digital I/O
PCI-DDA04/12 PCI-based 4-channel, 12-bit analog output board with 48 digital I/O
PCI-DDA08/12 PCI-based 8-channel, 12-bit analog output board with 48 digital I/O
PCI-DDA08/16 PCI-based 8-channel, 16-bit analog output board with 48 digital I/O
PCIM-DDA06/16 6-channel, 16-bit analog output board with 24 digital I/O (connector compatible with CIO-DDA06/16)
Signal Conditioning Options
CIO-ERB48 Electromechanical relay accessory, Form C, 4.3 A (SPDT) for DIO48, 96, and 192, 50-pin connector, 48 channels
close More Options...     User's Manual User Manual   
ISO-5B39-01 Analog isolation module, current output, (400 Hz), 0 to 5 V input, 4 to 20 mA output
close More Options...    
ISO-5B39-02 Analog isolation module, current output, (400 Hz), ±5 V input, 4 to 20 mA output
ISO-5B39-03 Analog isolation module, current output, (400 Hz), 0 to 5 V input, 0 to 20 mA output
ISO-5B39-04 Analog isolation module, current output, (400 Hz), ±5 V input, 0 to 20 mA output
ISO-5B39-07 Analog isolation module, current output, (400 Hz), ±10 V input, ±20 mA output
ISO-5B49-01 Analog isolation module, voltage output (400 Hz), 0 to 5 V input, ±5 V output
ISO-5B49-02 Analog isolation module, voltage output (400 Hz) ±5 V input, ±5 V output
ISO-5B49-03 Analog isolation module, voltage output (400 Hz) ±5 V input, 0 to 5 V output
ISO-5B49-04 Analog isolation module, voltage output (400 Hz) 0 to 10 V input, ±10 V output
ISO-5B49-05 Analog isolation module, voltage output (400 Hz) ±10 V input, ±10 V output
ISO-5B49-06 Analog isolation module, voltage output (400 Hz) ±10 V input, 0 to 10 V output
ISO-5B49-07 Analog isolation module, voltage output (400 Hz) ±5 V input, ±10 V output
ISO-DA08/P 5B module backplane for 50-pin DAC/DDA08 series, 8-channel
   
SSR-4-IDC-05 Solid-state relay module, quad, VDC input, 3.3 to 32 VDC
close More Options...     Data Sheet Data Sheet   
SSR-4-IAC-05 Solid-state relay, quad, VAC input, 90 to 140 Vrms/VDC
Data Sheet Data Sheet   
SSR-4-IAC-05A Solid-state relay module, quad, VAC input, 180 to 280 Vrms/VDC
Data Sheet Data Sheet   
SSR-4-IDC-05NP Solid-state relay module, quad, V input, 10 to 60 VDC non-polarized digital inputs
Data Sheet Data Sheet   
SSR-4-OAC-05 Solid-state relay module, quad, VAC output, 12 to 140 VAC, 3 A
Data Sheet Data Sheet   
SSR-4-OAC05A Solid-state relay module, quad, VAC output, 24 to 280 VAC, 3 A
Data Sheet Data Sheet   
SSR-4-ODC-05 Solid-state relay module, quad, VDC output, 3 to 60 VDC, 3 A
Data Sheet Data Sheet   
SSR-4-ODC05A Solid-state relay module, quad, VDC output, 5 to 200 VDC, 1 A
Data Sheet Data Sheet   
SSR-IDC-05 Solid-state relay module, single, DC sense, 3 to 32 VDC
close More Options...     Data Sheet Data Sheet   
SSR-IAC-05 Solid-state relay module, single, AC sense, 90 to 140 VAC
Data Sheet Data Sheet   
SSR-IAC-05A Solid-state relay module, single, AC sense, 180 to 280 VAC/VDC
Data Sheet Data Sheet   
SSR-IDC-05NP Solid-state relay module, single, DC sense, 10 to 32 VDC non-polarized digital inputs
Data Sheet Data Sheet   
SSR-OAC-05 Solid-state relay module, single, AC switch, 24 to 140 VAC, 3.5 A @ 120 VAC
Data Sheet Data Sheet   
SSR-OAC-05A Solid-state relay module, single, AC switch, 24 to 280 VAC, 3.5 A @ 240 VAC
Data Sheet Data Sheet   
SSR-ODC-05 Solid-state relay module, single, DC switch, 1 to 60 VDC @ 3.5 A
Data Sheet Data Sheet   
SSR-ODC-05A Solid-state relay module, single, DC switch, 4 to 200 VDC, 1 A
Data Sheet Data Sheet   
SSR-RACK24 Solid-state relay backplane (Gordos/OPTO-22 type relays), 24-channel
close More Options...     User's Manual User Manual   
SSR-RACK48 Solid-state relay backplane (quad type relays) with 50-pin connectors, 48-channel (12 quads)
close More Options...     User's Manual User Manual   
Accessories & Cables
SCB-50 Signal connection box, two independent (side-by-side) sets of 50 screw terminals, each connected one-to-one to a 50-pin header for ribbon cable mating
More Options...
CIO-MINI50 Universal screw-terminal board, 50-pin (view dimensional drawing)
CIO-TERM100 Universal screw-terminal board, 100 terminals, for use with high-density digital I/O boards, positions for pull-up resistors (view dimensional drawing)
Software
DASYLab® LITE 基于图标的数据采集、图形、控制和分析软件
More Options...
DASYLab® BASIC 基于图标的数据采集、图形、控制和分析软件
DASYLab® FULL 基于图标的数据采集、图形、控制和分析软件
DASYLab® PRO 基于图标的数据采集、图形、控制和分析软件
DASYLab® RUNTIME 基于图标的数据采集、图形、控制和分析软件
TracerDAQ® Pro 开箱即用的虚拟仪器套件，集成带状图、示波器、函数发生器和速率发生器 – 专业版
查看价格请先 录入信息 或 创建账户

Product Reviews


4 / 5
Ease of Use
4 / 5
Value
4 / 5
Techincal Support
4 / 5

100% of new reviewers recommend this product

PCI-DDA08/12
March 19, 2013
Great Board, Better Interface Possible?

Use this board in 4 systems currently. The analog outputs are/were much-needed. Wondering if there's a better connector or connectors for the outputs. The large ribbon cable interface to the breakout board is fairly clunky, and makes it hard to make my own direct-interface cable. I realize there's not many options in the long-and-thin 100 pin department, but figured it worth a comment.

  • Job Title: Electrical Engineer
  • Industry: Instrumentation Products
  • From: Princeton Junction, West Windsor Township, NJ, USA
  • Company Size: 1001-5001
  • Software Used: C/C++
  • Ease of use
  • Value
  • Techincal Support
Yes, I recommend this product!

Was this review helpful? Yes (1) / No (3)




Hello, I was wonderinf whether this board supports TTL trigger-In. Idea is to sequentially increase voltage on the analog output with each TLL high comming in? Is that possible? Can I load sequence of states into this board? Thank you

  • Job Title: Doctoral researcher
  • Industry: Science - Biology
  • Application:
59 months ago
R66 Lausanne, Switzerland


Answers

What you describe as a “trigger” is what we call a “clock”, or more specifically an external clock. The PCI-DDA series has only a memory depth of one sample per channel, and does not offer trigger or clocking capability. Therefore it will not meet your stated needs. The D/A channels on many of our multi-function PCI DAQ devices, such as the PCI-DAS6014, offer both FIFO memory and external clock capability. The D/A channels on many of our multi-function DAQ devices (such as the USB-1208HS-2AO/4AO, and USB-1608GX-2AO) do so as well, plus they add external trigger capability. Our software drivers for these devices allow you to create an array of data points in advance, and specify that they will be paced out (i.e. one output per edge) by an external TTL signal.

59 months ago
Measurement Computing

Was this answer helpful? Yes (0) / No (0)

  • Job Title:
  • Industry:
  • Application:
86 months ago
ozhan


Answers

Thank you for your inquiry. The PCI-DDA08/16 is not capable of generating waveforms at a 200KHz update rate because the DACs are software paced. That is, they are updated via software and not hardware paced with a clock. The speed will be determined by the speed of your PC, the overhead of your operating system, and the timing of your program. Here are a few of the products that are capable of generating a 200K waveform: USB-1208HS-4AO, USB-1616HS-4 and the USB-2627. All of these devices have support for 4 analog outputs (so you would need to use two devices) but they’re all capable of an update rate of 1 MHz/channel.

86 months ago
MeasurementComputing

Was this answer helpful? Yes (1) / No (0)

Included Software

  • TracerDAQ® for acquiring and displaying data and generating signals
  • InstaCalTM software utility for installing, configuration, and testing
  • Universal Library includes support for Visual Studio® and Visual Studio®.NET, including examples for Visual C++®, Visual C#®, and Visual Basic®.NET
  • ULx for NI LabVIEWTM Library of VIs and example programs to speed your NI LabVIEW development
  • Linux® Support for MCC DAQ products

Optional Software

  • DASYLab®2020 Software lets you interactively develop PC-based data acquisition applications by simply attaching functional icons
  • TracerDAQ®Pro - Out-of-the-box virtual instrument suite with strip chart, oscilloscope, function generator, and rate generator – professional version
  • MATLAB® Support for MCC Products - Software Environment for Data Acquisition, Data Analysis, and Application Development

Datasheets

PCI-DDA02/12
document
 
PCI-DDA04/12
document
 
PCI-DDA08/12
document
 
PCI-DDA08/16
document
 
PCIM-DDA06/16
document
 

 

Product Manuals

PCI-DDA02/12
document
 
PCI-DDA04/12
document
 
PCI-DDA08/12
document
 
PCI-DDA08/16
document
 
PCIM-DDA06/16
document
 

 

Quick Start Guide

DASYLab® LITE
QS-DASYLab-MCCDRV.pdf
 
ULx for NI LabVIEW™
QS ULx for NI LabVIEW.pdf
 

 

 

 

Programming Example Downloads      download

Product Videos

MCC Video Library
video
 
1 Year Warranty

1年保修

所有产品均有一年保修，请放心购买。

30 Day Money Back Guarantee

质量
保证

我们致力于设计和制造高于用户期望的数据采集（DAQ）产品。

Live Help

在线帮助

不知道哪款产品最适合您的应用？我们的销售工程师会帮助您。