| Cables |
| DT7816 Accessory Kit |
Includes STP781X Screw Terminal Panel, EP405 USB To Serial TTL Debug Cable, EP394 Power Supply, USB Cable, and Ethernet Cable
|
|
|
| DT7837 ACCESS. KIT |
Includes EP361 Power Supply, EP405 USB To Serial TTL Debug Cable, STP26 Screw Terminal Panel, USB Cable, and Ethernet Cable
|
|
|
| EP305 |
2m Shielded Cable
|
|
|
| EP307 |
50-pin one meter shielded cable for analog signals for DT3010/32, DT3016, and DT3034
|
|
|
| EP307-3 |
3 meter 50-pin shielded cable for analog signals
|
|
|
| EP308 |
68-pin one meter shielded cable for digital signals for DT3010/32, DT3016, and DT3034
|
|
|
| EP308-3 |
3 meter 68-pin shielded cable for digital signals
|
|
|
| EP360 |
2-meter shielded cable with two 37-pin connectors that connect an EP353 accessory panel to an STP37 screw terminal panel. (Can be used with the -BNC and -OEM versions for analog input connections.)
|
|
|
| EP361 |
+5V power supply (cable not included). Required for OEM configurations.
|
|
|
| EP377 |
Trigger Bus Cables, 25-pin, 0.5 meter
|
|
|
| EP390 |
1.52-meter cable with two 78- pin connectors that connect the STP78 screw terminal panel to the DT9862. Can be used with enclosure and -OEM versions.
|
|
|
| EP398 |
RJ50 Cables (qty 4) used to connect four screw terminal panels to DT9838
|
|
|
| Rack, Chassis & Mounting Accessories |
| BNC DIN RAIL KIT |
Kit for mounting the DT980X Series USB modules to a DIN rail. Horizontal or vertical mounting fits any application. Includes mounting clips, screws, mounting adaptor, and instructions. Rail not included.
|
|
|
| DIN RAIL KIT |
Kit for mounting DT980X Series USB modules to a DIN rail. Horizontal or vertical mounting fits any application. Includes mounting clips, screws, mounting adaptor, and instructions. Rail not included.
|
|
|
| ECON DIN RAIL KIT |
Kit for mounting ECON Series USB modules to a DIN rail. Horizontal or vertical mounting fits any application. Includes mounting clips, screws, and instructions. Rail not included.
|
|
|
| EP373 |
Single Rack-Mount Kit for MEASURpoint Instruments (in 2U enclosure only).
|
|
|
| EP374 |
Double Rack-Mount Kit for MEASURpoint Instruments (in 2U enclosure only).
|
|
|
| EP379 |
Dual-Rack Mount Kit, 1U
|
|
|
| EP380 |
Single-Rack Mount Kit, 1U
|
|
|
| EP386 |
RJ45 Patch Panel, contains four RJ45 connectors that are wired in parallel, to connect four DT9837, DT9838, and/or DT9847 modules together using the Sync Bus
|
|
|
| EP402 |
Rack Mount Kit for DT9857
|
|
|
| Connectors |
| DT740 |
Screw Terminal Panel for DT3010 Series
|
|
|
| EP349 |
Terminal Block Set: Includes six 9-pin pluggable terminal blocks.
|
|
|
| STP STRAIN |
RJ50 to Screw Terminal Panel Adaptor (qty 4)
|
|
|
| STP STRAIN 120 |
RJ50 to Screw Terminal Panel Adaptor with a 120 Ohm quarter-bridge completion resistor installed (qty 4)
|
|
|
| STP25 |
Screw Terminal Panel for DIO, C/T, and external trigger connections. Includes EP403 cable.
|
|
|
| STP300 |
Screw Terminal Panel for the DT300 Series
|
|
|
| STP37 |
Screw terminal panel. Allows connections to analog input (except with MEASURpoint), digital I/O, counter/timer, and trigger signals from an EP353 or EP356 accessory panel. (Can be used with -BNC and -OEM versions.)
|
|
|
| STP68-DIN |
68-pin DIN-rail mountable Screw Terminal Panel
|
|
|
| STP781X |
Screw Terminal Panel
|
|
|
